We specialise in manufacturing all concrete repair products for the technically correct repair and protection of concrete. Our products are available for use across many types of structures and for concrete repair in different applications, climate and exposure conditions. The product range comprises of High Modulus Epoxy Adhesive, Low Viscosity, High Modulus Epoxy Adhesive, Hydrophobic Polyurethane Grout, Flowable, Shrinkage Compensated Mortar, High Performance Single component PolymerModified, Repair Mortar, Cementitious waterproofing repairing mortar, Two component epoxy based zinc rich primer, Tar based epoxy resin coating, High performance epoxy bedding and fairing repair mortar and High performance fast setting patch repair mortar.
Uses
- Bonding of concrete, masonry, steel, or wood
- Anchoring bolts, dowels, or pins
- Pick-proof sealant for jails/prisons and kennels
- Seals cracks and sets ports prior to injection
- Mix with sand to create a repair mortar
Advantages
- Exceptional adhesion to construction materials
- Perfect for vertical and overhead bonding
- Easy to use
- Moisture insensitive
- Superior strength
Uses
- Bonding of concrete, masonry or wood
- Injection resin for cracked, structural substrates
- Gravity feed cracks in concrete slabs
- Anchoring bolts, dowels, or pins
- Mix with dried silica sand to create a repair mortar
Advantages
- Exceptional adhesion to construction materials
- Low viscosity penetrates deep into cracks
- Easy to use
- Moisture insensitive
- Impeccable bond strength
Uses
- Concrete, masonry and stonework substrates
- Filling of pinholes, prior to overcoating
- General reprofiling purposes on all types of concrete substrates
- As a fairing coat in association with other repair mortars
Advantages
- Applied in layer 3 mm thickness in a single application
- Economical as it eliminates the requirement of a primer
- Eliminates the need for curing
Uses
- Use on grade, above and below grade
- Horizontal surfaces and formed vertical and overhead surfaces
- Repair material for parking facilities, industrial plants, walkways, bridges, tunnels, dams and balconies
- Filler for voids and cavities
- Compatible with galvanic anodes
Advantages
- 3/4” to 3″ (1.9 cm to 7.6 cm) depth repairs (neat)
- Can be extended with pea gravel for deeper repairs
- Silica fume enhanced
- High bond strength
- Pumpable
- Easily mixed
- Can contribute to LEED points
Uses
- All concrete, masonry and stonework substrates.
- Active or passive waterproofing and protection against water and moisture
- For all horizontal and vertical substrates for levelling, reprofiling and waterproofing.
- Filling up spaces between walls and floors
- All water retaining structures
- Foundations, slabs, retaining walls, etc.
Advantages
- Allows vapor to pass through substrate
- Remains permanently active within concrete
- Provides resistance against chemical exposure
- Can be used in structures retaining potable water.
- No membrane to tear or puncture
- Exhibits excellent resistance to abrasion, mechanical and chemical wear
Uses
- For all steel reinforcements in concrete structures exposed to free air. The primer acts as a protective coating.
- It can be used as a primer to steel substrates, prior to further coatings.
Advantages
- PC Zinc Primer protects the steel structures actively from corrosion.
- It bonds excellently to the steel and metal surfaces.
- It sets fast. Hence saves time between two consecutive coatings.
Uses
- Water storage tanks, channels and waterways etc.
- STPs and WTPs, manhole sewage ways linings.
- All chemicals processing plants
- Foundations waterproofing.
Advantages
- PC Coat Pitch EP is very economic as it eliminates the application of primer.
- It is extremely resistant to abrasion due to harsh chemicals and prohibits all kinds of microbial growth, hence increasing the life of the substrate beneath.
- It also acts as an impervious waterproofing membrane.
- It can be applied to fresh concrete surface using brush, roller or spray.
Uses
- Filling pinholes, securing bolts into walls, dowel bars anchoring, etc.
- General reprofiling over large areas upto 3mm depth
- Sealing of surface cracks in preparation for crack injection
- Fixing slip bricks into concrete
- Bedding tiles
- Repairing concrete posts in-site.
Advantages
- PC Mortar EP Plus reduces usage of subsequent coatings hence is very cost efficient.
- It is a high performance repair mortar. It shows excellent resistance to chemical agents and solvents, exhibits strong adhesion. to concrete substrate and exceptional hardness.
- Easy to apply and finish, manufactured to meet local conditions.
Uses
- For both vehicle and overhead repairs
- Resurfacing of damaged/wornout concrete structures
- Both sub-structures, Super-structures application
- Marine structure, tunnels, dams, bridges, parking structures, reservoirs etc.
Advantages
- Single-component material hence easy to mix & handle
- Resist harsh climatic conditions & chemical corrosions
- Non-permeable hence protects rebar from corrosion high bond strength provides excellent adhesion.
Uses
- Highways, roads and pavements.
- Loading decks, parking lots and ramps.
- Bridges.
- Industrial buildings, warehouses and commercial floors
- For all kinds of multi-storeyed residential buildings.
Advantages
- PC Patchmass sets quickly and hence enables faster completion of projects.
- It is economic and hence suitable for both interiors and exteriors.
- It is resistant to thaw damages.
- It bonds excellently to the concrete.
Uses
- Interior and exterior concrete screeds.
- Bonding of floor toppings
- Repairing old, worn-out and weathered concrete as well as cracks
- Warehouses, laboratories, office spaces and other commercial storage facilities
Advantages
- Ready to use single component product
- Adheres to the concrete, plaster, masonry and stone work excellently as a result form a strong bond
- Makes the concrete durable by making the concrete weather resistant and impermeable to chloride, free radical ions and other aggressive chemicals
- Makes the screeds, plasters and slurries Waterproof
- Versatile and very economical to use
Uses
- Vertical and overhead repairs
- Resurfacing of damaged/spalled concrete
- Marine structures, tunnels and dams
- Parking structures & bridges
- For all kinds of substructure and superstructure applications
Advantages
- A single-component product hence nullifies errors in mixing and handling
- Excellent resistance to extreme temperatures
- Polymer modified with fiber reinforcement product
- Contains an integral corrosion inhibitor
- Low permeability helps protect rebar from corrosion
- High bond strength provides excellent adhesion